Blackbird Pro
The ultimate budget ems
Features
120mhZ Processor
The Blackbird Pro’s processing power pushes it beyond what is required to run an engine, allowing for future features to be implemented with just an update.
Dual 16x16 3D fuel and ignition maps, with base of either TPS (Alpha-N) or MAP (Speed Density)
The use of two tables allows you the flexibility to run a street tune and a race tune without needing to flash the ECU.
On the Fly Tune Changing
With just the flick of a switch you can go from a tame street tune to pushing your car to it’s limit.
Supports up to 16 cylinders fuel and ignition with 8 channels of fuel and 8 channels of ignition outputs
The Blackbird Pro is built to be adapted to its environment, with its plentiful outputs it can run a 8 cylinder engine in full sequential or up to a 16 cylinder engine with paired injectors.
Fully configurable io
Configure the Blackbird Pro to work in your application
Simple Sensor Calibration
Gone are the days of messing with a multimeter to calibrate your sensors, with just a few clicks you’re ready to go.
Wideband & Narrowband Oxygen Sensor Inputs
The dual inputs onboard can be used with both a wideband and a narrowband O2 sensor with no hardware changes.
Open & Closed Loop as well as Hybrid Idle Control
Hybrid idle control means you no longer need to worry about the AC or a heavy load stalling your engine.
Open and Closed Loop Boost Control
Integrated boost controller is fully programmable and ready to go.
Open Loop VVT Control
Take full advantage of your engine and cam with fully variable cam timing.
Launch Control
Put all your power down with the integrated programmable 2-step controller
Programmable Dual Stage Nitrous Controller
Protect your engine when it matters most, the integrated nitrous controller gives you full control of what’s happening in your engine bay at all times.
Water-Meth Injection Control
The integrated WMI controller lets you keep your turbo and engine happy by keeping them cool
Flex Fuel
Flex-Fuel ready with fuel composition and fuel temp compensation
No Lift Shift
Let the Blackbird Pro help you shift, when it detects your foot on the clutch it will kill the injectors so you don’t need to lift off the pedal
Programmable Rev Limiter (Rolling & Hard)
Keep your engine safe with a programmable rev limiter without sacrificing performance
General Datalogging
Data-log all available inputs and outputs to fine tune your engine’s performance
High Speed Tooth Logging
Get your engine running faster with the high speed tooth-logger, no need to guess what is happening anymore
Over-Dwell and Over-Duty Protection
Stop worrying about your coil’s, the in-built protection means you can just get in and go
Battery Voltage Compensation
Don’t stress about your charging system having to maintain voltage, the Blackbird Pro has you covered
Modular Decoder Wheel Support
Customizable decoder support, just input your cam and crank wheel tooth counts and you’re all set.
open-sOURCE fIRMWARE
The Blackbird Pro is powered by the open-source Speeduino firmware, which means it is constantly evolving with new features and always up to date. The team at Infinite Limit Engineering thoroughly test firmware revisions before they become available to our customers on our test mules,